Handlekurven er tom
Handlekurven er tom
Du vil motta en e-post så snart produktet er på lager!
En ukjent feil har oppstått. Prøve igjen
High quality potentiometers from AxLabs. These audio taper pots feature a ¼” bushing and coarse (T18) knurled shaft (Epiphone m.fl. - ikke Gibson). The dish back style matches the construction of many vintage guitars.
Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry.
AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positioned for strength and to reduce friction. Lastly, a nickel-plated steel housing was used for the ease of gripping solder as well as the classic, high-end look of vintage pots.
Features:
Specifications:
| Body Diameter | 24.6 mm | ||
| Body Height | 9.1 mm | ||
| Bushing Length | 6.5 mm | ||
| Bushing Threading | ⅜”-32 | ||
| Flat Washer Inner Diameter | 10.2 mm | ||
| Flat Washer Outer Diameter | 16 mm | ||
| Lock Washer Inner Diameter | 10.4 mm | ||
| Lock Washer Outer Diameter | 18 mm | ||
| Lock Washer Thickness | 1 mm | ||
| Nut Thickness | 2.4 mm | ||
| Nut Width | 12.5 mm | ||
| Rotation Angle | 260° | ||
| Shaft Diameter | 6 mm | ||
| Shaft Length | 6 mm | ||
1 stk shim for å endre vinkel mellom hals og kropp på gitar. (Passer ikke bass) 1,52 mm tykkeste ende 0,25 mm tynneste ende 1 grad helling
1 stk shim for å endre vinkel mellom hals og kropp på gitar. (Passer ikke bass) 0,71 mm tykkeste ende 0,20 mm tynneste ende 0,5 grad helling
Pure Tone Mono jack chassi med doble kontaktpunkt for bedre og mer stabil kontakt mot jackpluggen. This new panel-mount jack boasts full contact for optimal signal and lowest possible noise....
Metrisk 3 veis vender for Epihone LP og andre rimelige gitarmodeller. Bushing diameter = 29/64 in (11.7mm) Bushing length = 7/16 in. (11mm) Minimum depth requirement = 7/8 in....
