Handlekurven er tom
Handlekurven er tom
Du vil motta en e-post så snart produktet er på lager!
En ukjent feil har oppstått. Prøve igjen
Emerson Custom Premium Potentiometer - 500k, Short Solid Shaft
TAPER: AUDIO TAPER (20% PROPRIETARY EMERSON DESIGN) (20% OUTPUT @ ½ ROTATION)
OHM VALUE: 500K Ω
TOLERANCE: +/- 8% TOLERANCE (460K - 540K Ω)
SHAFT LENGTH: 0.375” (⅜”) FOR USE ON PICKGUARDS, CONTROL PLATES, AND THIN WOOD TOPS)
SHAFT STYLE: SOLID (FOR USE WITH US SPEC ¼” SET SCREW STYLE KNOBS)
INCLUDED HARDWARE: 1 FLAT WASHER, 1 LOCK WASHER, 1 MOUNTING NUT
PRODUCT NOTE: WORKS GREAT IN P90 & HB TELES. OR OTHER SETUP THAT NEEDS A 500K SOLID SHAFT POT. (FOR SET SCREW KNOBS)
New for 2024!
The new Emerson pots are finally here. After 3 years of development, testing and research we are proud to announce the launch of the guitar pot we’ve always wanted to offer, but couldn’t… until now! The Emerson PREMIER PRO Pot. These completely new PREMIER PRO pots were designed by the founder and owner Mitch Ingram along with tons of help and technical knowledge from Jon Erickson at Tonecraft Audio.
We have been offering our spec’d line of “Emerson PRO CTS pots” for many years, but when 2020 rolled around and supply chain disruptions created lead-times 20x the norm, it became clear that it was time to take matters into our own hands. Mitch was tired of accepting the industry norm that CTS pots are “good enough” or the “best” available and set out to create his own design and brand of in-house pots. The PREMIER PRO pots not only look familiar but are built with an incredibly consistent feel and function from lot to lot. It took a truckload of money, time and effort, but we believe that these new Emerson PREMIER PRO pots are the best guitar pots available… PERIOD.
Unconstrained by an off the shelf menu of factory options, we designed and developed these pots from the ground up. We put extra care into all the fine details. Ideal taper, torque and tolerance is meticulously built-in and our unique lugs are designed specifically for point to point assembly; slightly oversized with plenty of room to run ground wires/buss wires and any other connection you need. We chose a robust Fiberglass substrate that the solder lugs and resistive track are mounted to. This material is exceptionally strong and won’t easily bend and snap like those in many other pots. The taper we used is a custom 20% Audio Taper and a proprietary design from Emerson. This taper works equally as well in the volume position as it does in the tone position.
We designed and built the PREMIER PRO line of pots to be exceptionally rugged and reliable for the fine guitars they will function in. Emerson appreciates the support of players, builders and distributors around the world. We are proud to always push the levels of quality and craftmanship alongside you.
Varenr KONVBRA
Konverteringshylse i messing som tres på splitshaftpotmeter for å gjøre dem om til solidshaft. Endrer yttermål fra metrisk til tommemål (1/4 toms diameter på...
Varenr PSWUS
Låseskive til proffe 1/4 potmeter fra CTS og CGE original Fender og Gibson. Passer også jack chassi og hindrer rotasjon. Pris er pr stk.
Varenr PNN
Nikkel mutter til jack chassi med US gjenger som for eksempel Switchcraft. Passer også US potmeter fra CTS og CGE. Passer ikke metriske chassis eller potmeter. Pris er pr stk....
Varenr PDWN
Nikkel skive til potmeter fra CTS og CGE. Passer også jack chassi.
Skrue for plekterbrett, kontrollplate m.m. på Fender basser og gitarer. Prisen er pr stk. Lengde: 13,5mm Diameter gjenget: 2,5mm Lengde på gjenget: 10mm
Stereo jack chassi fra Switchcraft - verdens ledende leverandør de siste 50 år.
Skrue i USA kvalitet for festing av hals/halsplate. Prisen er pr stk. US Spec #8 x 1 3/4" Lengde: 4,44 cm Diameter: 4,2mm
Skrue for remfeste. Samme skrue brukes til Telecaster bridge. Lengde: 25mm Lengde gjenger: 22mm Dimensjon: 3,5 mm
