Potmeter Bourns m DPDT switch 250K LOG

Art.nr: PDB183-250-1

kr.135,-

Antall:

Gir 0 bonuspoeng ved kjøp

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Bourns

5 På lager

Informasjon

1 stk 250K Audiotaper (Log) potmeter med DTDP push pull switch til f-eks. coil tapping, fasevending eller split funksjoner. To separate potmeterbaner som kan benyttes som beskrevet i eksemplene under.Passer metriske knotter med 18 tagger.

Bourns® Pro Audio PDB183

Carbon element
Metal bushing
Standard Bushing 3/8 in.
Metal shaft
DPDT push-pull switch
RoHS Compliant

Since these potentiometers have two separate resistance elements they are equivalent to a dual-gang potentiometer like a Fender® TBX® which has 2 potentiometers on one shaft (not the same as a dual concentric stack-knob potentiometer with 1 shaft inside the other). Here are some suggestions for wiring the dual elements:

For redundancy try running jumpers to connect both elements together. This way if one element gets dirty the other one might not.
You can hook 2 different pickups to one knob: one to each element with different tone caps. I like a .015 or .022uf for treble pickups and .05 or .1uf for neck pickups. Don't turn the .1uf tone all the way down, use it to just roll off a certain high frequency band that makes even a Telecaster® neck pickup sound like a jazz-box arch top
If you have to isolate 2 pickups from each other and you are limited to one hole for a tone control you can wire one pickup to each wafer and only the grounds are common

Our custom Bourns PDB183 push/pull pot is a little different than your normal design because it features two sets of lugs on the stacked pot. You can use these as a volume or tone control for two pickups with one pot/knob. Plus you have the push-pull switch as well for splitting humbuckers, or a variety of other potentials needing two switches (DPDT).

Share |